KD4008 - Computer Programming

What will I learn on this module?

Within this module you will cover the design and development of C based code for both a standard PC and an embedded system.

The module syllabus us based but not exclusively on the following:
• Introduction of computer systems, the architecture and types from standard PCs to embedded systems,
• Code development from specifications through Pseudo code to a top-down or bottom-up based design,
• Language operators for example, if-then-else, switch-case, do-while, for,
• Data types for systems including bit length, and data pointer structures and use,
• Use of information hiding in functions, with strongly typed designs,
• File system access for a PC and for an embedded system where files may be more abstract handles,
• Controlling hardware on an embedded system for example and ADC or DAC on a microcontroller,
• The use of IO lines and interrupt structures in low level programming.

Typically learning in the module will be based on simple case studies and example such that the above knowledge can be applied to solve a real world problem within a defined engineering context. An example of such a real-world problem would be a Traffic Light controller, or Home Burglar Alarm system.

How will I learn on this module?

This module is taught primarily using workshops sessions designed to help you (the student) understand the C programming language and how to write good programs. The module will provide support material available via blackboard, therefore all students can learn at the individuals pace with access to online content in the lectures and lab work.
The skills acquired throughout the labs will enhance your experience to deal with practical work in writing C programs to solve Engineering problems. Case study examples will be provided in the module lectures and workshops. This module is heavily based on labs, showing students how to use software and apply their new knowledge in a practical setting. To support student learning TEL is used throughout, including the use of recorded lectures and additional support videos.

How will I be supported academically on this module?

Academic staff will be available in the Lectures and Workshop sessions to answer questions each week, this forms a primary source of feedback on the performance of you (the student) in the workshop context. Also there may be a number of formative Multi Choice Question sessions (MCQs) to help you determine how well you are coping and understanding the work, these will be delivered mainly in the lecture slots again as a form of formative feedback. Topic areas that are noted as areas where the group is struggling can then be rectified at an earlier stage. Assessment feedback will be in the form of written comments in the returned assignment work to you. In addition to this there is an open door policy for students to come and see the Lecturer if they have a problem.

Blackboard will be used extensively for lecture and workshop content as noted before to allow individual paced learning for all students.

In addition the lecturers can be visited in their rooms as we operate an open door policy.

What will I be expected to read on this module?

All modules at Northumbria include a range of reading materials that students are expected to engage with. Online reading lists (provided after enrolment) give you access to your reading material for your modules. The Library works in partnership with your module tutors to ensure you have access to the material that you need.

What will I be expected to achieve?

Knowledge & Understanding:
1. Select and apply appropriate computational and analytical techniques to model complex problems, discussing the limitations of the techniques employed (C3, M3)

Intellectual / Professional skills & abilities:

2. Develop a computer program to solve a given engineering problem (C5, M5)

Personal Values Attributes (Global / Cultural awareness, Ethics, Curiosity) (PVA):
3. Use practical laboratory and workshop skills to investigate complex problems (C12, M12)

How will I be assessed?

This module is assessed by two assessments.
The first assessment is a coursework assignment, which involves testing, assessing and understanding of the underlying theories and problem-solving requirements of programming, which assesses MLO1.
The second assessment will be an assignment based on designing a program for a microcontroller which assesses MLO2 and MLO3.

Each coursework is worth 50% of the module with each assessing LO1,LO2 and LO3

Formative assessment will be via weekly Workshops that cover aspects of computer programming using the C Programming Language.

Feedback will be via weekly contact with the Workshop Tutor and via comments by the Tutor marking the assignments in the students returned assignment work.

Pre-requisite(s)

N/A

Co-requisite(s)

N/A

Module abstract

This Computer Programming Module is designed to teach you how to program a computer. It teaches you the computer programming language C that is the most common language (and one that almost every computer in the world can be programmed to use).

The first part of the module teaches you how to program on a PC. The second part of the module shows you how to use C to program a microcontroller. With the microcontroller you can control hardware directly and write C programs to do things like read switch inputs and Temperature Sensors. You can also control Motors and LED indicators.

The C language is a very good general purpose programming language and executes on most computers very efficiently. Being able to program in C is highly favoured by employers and allows you to be able to learn other languages like C++ and Java.

Course info

UCAS Code Z024

Credits 20

Level of Study Undergraduate

Mode of Study 4 years Full Time or 5 years with a placement (sandwich)/study abroad

School Engineering, Physics and Mathematics

Location City Campus, Northumbria University

City Newcastle

Start September 2027

Fee Information

Module Information

Accuracy of information

All information is accurate at the time of sharing.

 

How your course is delivered

Full time Courses are primarily delivered via on-campus face to face learning but could include elements of online learning.

 

Changes to your course

Most courses run as described on our website and in our marketing materials. Occasionally we may need to make changes, for example due to a change in the law or regulatory requirements, requirements of a Professional, Statutory or Regulatory Body, or our quality assurance processes. Where a change is significant (in line with the Competition and Markets Authority's guidance on "substantial changes"), we will consult with affected students in advance where the change is being decided, and will explain the reason for the change and inform you at the earliest opportunity.

If we make a significant variation to your programme, you are entitled to: request a transfer to an alternative, appropriate programme; withdraw and have your tuition fees adjusted; or raise a complaint through the Student Complaints Procedure.

Optional modules listed on course pages may be subject to change depending on uptake numbers each year. Where a module you selected is withdrawn, the options above apply.

 

Contact time

Contact time is subject to increase or decrease in line with possible restrictions imposed by the government or the University in the interest of maintaining the health and safety and wellbeing of students, staff, and visitors if this is deemed necessary in future.

 

Images and video

The photography and video on this page are used for illustration. They may have been taken at different times and in different parts of the University, and may show facilities, equipment, staff, students or activities that are not part of this course. They are not a guarantee of the specific facilities or equipment you will use.

The course content, entry requirements and fees sections of this page, together with the Programme Specification, set out what this course includes. Our facilities are updated over time and may change during your studies. 

 

Useful Links

Find out about our distinctive approach at 
www.northumbria.ac.uk/exp

Admissions Terms and Conditions
northumbria.ac.uk/terms
Fees and Funding
northumbria.ac.uk/fees
Admissions Policy
northumbria.ac.uk/adpolicy

Admissions Complaints Policy
northumbria.ac.uk/complaints